Atec Teseq-Schaffner-CDN500 User Manual

Browse online or download User Manual for Equipment Atec Teseq-Schaffner-CDN500. Atec Teseq-Schaffner-CDN500 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
The coupling clamp CDN 500 is manufactured
exactly in accordance with the drawings and
specifications of ISO 7637-3 for capacitively
coupling the transients onto cables and wiring
harnesses. With its characteristic impedance
of 50Ω, the CDN 500 coupling clamp is
connected to the generator via a coaxial
cable and terminated on the far side with a
50Ω load resistor. A suitable terminating
load is available as an accessory under the
type number INA 5030, which also provides a
measurement output via a 40dB attenuator.
The coupling clamp will accept ribbon
cables as well as round cables of up to 40mm
diameter. The effective coupling capacitance
depends on the cross section and the ma-
terial of the cable used; a typical value being
around 100pF.
CDN 500
ISO 7637-3 Capacitive coupling clamp
Technical specifications
Typical coupling capacitance: 100pF approx. (200pF max.)
Active length: 1000mm (39.4”)
Diameter of round cables: 40mm (1.6”) max.
Breakdown voltage: >500V
Characteristic impedance: 50Ω ±10%
Connectors: 50Ω BNC (1 each side)
Dimensions: L x W x H 1300 x 300 x 106mm
(51.2 x 11.8 x 4.2”)
Weight: 11.5kg (25lbs) approx.
Construction: Brass with plated surface; coupling panel with
roller hinges for precise positioning
Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com 690-826A June 2006
Q
Precision transient capacitive coupler
Q
Complies with ISO 7637-3
Q
High quality brass plated surfaces
Page view 0
1

Summary of Contents

Page 1

The coupling clamp CDN 500 is manufacturedexactly in accordance with the drawings andspecifications of ISO 7637-3 for capacitivelycoupling the transie

Comments to this Manuals

No comments