Atec Solar-9354-1 User Manual download pdf

MODEL 9354-1 UNIVERSAL TRANSIENT GENERATOR

for susceptibility tests MIL-STD461C/D/E, DO-160C/D and other speciﬁcations

APPLICATION

The Model 9354-1 Universal Transient

Generator was especially designed for the

performance of a variety of pulse susceptibility

tests on subsystems and/or equipment, in

accordance with MIL-STD-461D and E, method

CS116; RTCA DO160D, section 22; MIL-STD-461C,

methods CS10 and CS11.

Through the use of many Solar accessories,

including various reactive networks and coupling

devices, as well as other commercially available

items such as loop antennas, parallel plates,

and TEM cells, the generated output may be

modified and applied to other specifications.

(Contact Solar customer service for details.)

DESCRIPTION

Model 9354-1 Universal Transient Generator

provides nine selectable waveforms, including

six damped sinusoidal pulses (10 KHz, 100 KHz,

1 MHz, 10 MHz, 30 MHz, and 100 MHz) and

three double exponential pulses (6.4 S, 70 S

and 500 S).

Auto pulsing of the sinusoidal repetition rate

is internally adjusted from 0.5 to 1.0 pulse per

second. A front panel-mounted push button can

be used to manually trigger single pulses. The

peak amplitude of the selected output pulse is

adjustable as a percentage of the charge voltage.

The six damped sinusoidal waveforms were

designed to meet the requirements of

MIL-STD-461D and E, method CS116, when

applied in accordance with the test method of

MIL-STD-462D. Continuous tunable frequencies

can be obtained by the use of the optional

variable frequency modules.

These same waveforms are applicable to the

requirements of MIL-STD-461C, methods CS10

and CS11, when applied in accordance with the

test method of MIL-STD-462, Notice 5.

The 1MHz and 10 MHz damped sinusoidal

waveforms have been extended to a peak open

circuit voltage of 3200 volts and a calculated

short circuit current of 128 amperes to meet

the requirements of RTCA DO-160D, Section 22,

Table 22-2, waveform 3.

The three double exponential pulses were

designed to meet the requirements of RTCA

DO-160D, Section 22, Tables 22-2 and 22-3.

Table 1 lists the test level that can be achieved

from the Model 9354-1.

FEATURES



Panel-mounted digital voltmeter. Monitors the

adjusted open circuit discharge voltage.



Pulse rates up to two pulses per second

maximum (factory adjusted).



Single pulse feature enables controlled

isolation of transient effects.



Output voltage adjustable from 0.1% to 100%

of selected discharge voltage.

Table 1: DO-160D Test Levels possible

from Model 9354-1

Waveform Pin Injection Cable Bundle

Injection

1 (70 S) no requirement level 1- 4

2 (6.4 S) no requirement level 1 - 4

3 (1MHz & level 1 - 5 level 1 - 4

10 MHz)

4 (70 S) level 1 - 5 level 1 - 4

5B (500 S) level 1 - 4 level 1 - 3

1 2 3

Summary of Contents

Page 1 - FEATURES

MODEL 9354-1 UNIVERSAL TRANSIENT GENERATORfor susceptibility tests MIL-STD461C/D/E, DO-160C/D and other speciﬁcationsAPPLICATIONThe Model 9354-1 Univ

Page 2 - SPECIFICATIONS

MODEL 9354-1 UNIVERSAL TRANSIENT GENERATORAVAILABLE ACCESSORIESVariable and Step Frequency Modules. Providestunable frequencies for injection of dampe

Page 3 - DIMENSIONS

MODEL 9354-1 UNIVERSAL TRANSIENT GENERATORDOUBLE EXPONENTIAL PULSES(NOTE: MEASUREMENT OF SHORT CIRCUIT CUR-RENTS ARE LIMITED BY THE XLOF THE CIRCUIT.A

Comments to this Manuals

No comments

Atec Solar-9354-1 User Manual

Browse online or download User Manual for Equipment Atec Solar-9354-1. Atec Solar-9354-1 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Atec Solar-9354-1