Atec Anritsu-MT8220T User Manual download pdf (Page 4)

4 of 28 PN: 11410-00698 Rev. B MT8220T TDS

Specifications BTS Master™ MT8220T

Spectrum Analyzer

Measurements

Smart Measurements Field Strength (uses antenna calibration tables to measure dBm/m

, dBµV/m, dBV/m, dBmV/m, V/m,

W/m

, dBW/m

, A/m, dBA/m and W/cm

)

Occupied Bandwidth (measures 99 % to 1 % power channel of a signal)

Channel Power (measures the total power in a specified bandwidth)

ACPR (adjacent channel power ratio)

AM/FM/SSB Demodulation (AM, wide/narrow FM, upper/lower SSB), (audio out only)

C/I (carrier-to-interference ratio)

Emission Mask (recall limit lines as emission mask)

Coverage Mapping (requires Option 0431)

IQ Waveform Capture (requires Option 0024)

Setup Parameters

Frequency Center/Start/Stop, Span, Frequency Step, Frequency Offset, Signal Standard, Channel #

Amplitude Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection

Span Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span

Bandwidth RBW, Auto RBW, VBW, Auto VBW, RBW/VBW Ratio, Span/RBW Ratio

Application Options Bias-Tee (On/Off), Impedance (50

, 75

, Other)

Sweep Functions

Sweep Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type,

Gated Sweep (requires Option 0090)

Sweep Mode Fast (100x Performance), Performance, No FFT, Burst Detect (1000x Fast in 15 MHz span)

Detection Peak, RMS/Avg, Negative, Sample, Quasi-peak

Triggers Free Run, External, Video, Change Position, Manual

Trace Functions

Traces Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations

Trace A Operations Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)

Trace B Operations A

→

B, B

←→

C, Max Hold, Min Hold

Trace C Operations A

→

C, B

←→

C, Max Hold, Min Hold, A – B

→

C, B – A

→

C, Relative Reference (dB), Scale

Marker Functions

Markers Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,

Marker Table (On/Off/Large), All Markers Off

Marker Types Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker

Marker Auto-Position Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,

Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level

Marker Table 1-6 markers frequency and amplitude, plus delta markers frequency offset and amplitude

Limit Line Functions

Limit Lines Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit

Limit Line Edit Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right

Limit Line Move To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1

Limit Line Envelope Create Envelope, Update Amplitude, Number of Points (41), Offset, Shape Square/Slope

Limit Line Advanced Type (Absolute/Relative), Mirror, Save/Recall

Frequency

Frequency Range 150 kHz to 7.1 GHz (usable to 0 Hz)

Maximum Continuous Input +30 dBm

Tuning Resolution 1 Hz

Frequency Reference Aging: ± 1.0

–6

/10 years

Frequency Span Accuracy ± 3

–7

(25 °C ± 25 °C) + aging, 10 Hz to 7.1 GHz including zero span

Sweep Time Minimum 100 ms, 10

s to 600 s in zero span

Sweep Time Accuracy ± 2 % in zero span

Bandwidth

Resolution Bandwidth (RBW) 1 Hz to 3 MHz in 1–3 sequence ± 10 % (–3 dB bandwidth)

Video Bandwidth (VBW) 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth)

RBW with Quasi-Peak Detection 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth)

VBW with Quasi-Peak Detection Auto VBW is On, RBW/VBW = 1

VBW/Average Type Linear/Log

Spectral Purity

SSB Phase Noise –100 dBc/Hz @ 10 kHz, 20 kHz, and 30 kHz offset from carrier

–102 dBc/Hz @ 100 kHz offset from carrier

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Atec Anritsu-MT8220T User Manual Page 4

Comments to this Manuals

Related products and manuals for Equipment Atec Anritsu-MT8220T