Atec Temptronic-TP04310A User Manual download pdf

Temperature Range:

1,3

-80

° to +225°C (60 Hz System)

-75° to +225°C (50 Hz System)

Typical Temperature Transition Rate (air)

1,2

-55° to +125°C: approximately 10 seconds or less

+125

° to -55°C: approximately 10 seconds or less

System air flow output

2.4 to 9 liters/second (5 to 18 scfm) CONTINUOUS

Temperature accuracy 1.0°C (when calibrated against NIST transfer standard)

Temperature set, display and resolution ± 0.1°C

Temperature Control:

DUT Sensor Ports Type T and Type K Thermocouple ports standard

DUT Control Control to within ± 0.1°C; SELF-TUNING available in DUT Control

Remote interface ports IEEE-488, RS232C Serial, and Start Test/End of Test/Stop

on First Fail (ST/ET/SFF)

Note: Ultimate low temperature and system performance may vary under operating conditions less than or greater than nominal.

Note: Transition performed under nominal operating conditions.

Note: Low temperature extremes can be achieved at reduced airflow rates.

Model TP04310A ThermoStream

System Specifications

Note: US Patent no. 4,734,872

TP04310A

TEMPERATURE PERFORMANCE AND AIRFLOW CAPACITY

USER FEATURES

Modes of Operation Two: Manual and Program Modes

Test set-up configurations 12 Manual Mode test programs and 12 Program Mode

test programs may be created

Test set-up storage 11 Manual Mode test programs, 11 Program Mode

test programs and 11 affiliated “Define Parameters”

test set-ups can be stored for later recall.

Ramp/soak/cycle configurations

In Program Mode, up to 12 sequences per test set-up;

table is displayed on-scr

een

DUT temperature control Patented

Dual Loop Temperature Control

Status indicators Real-time status displayed on-screen and via remote

interface

Purge flow tester interface Dry air purge protects tester electronics

protection from condensation

Purge flow capacity 0.25 to 1.5 liters per second (0.5 to 3 scfm) airflow

Calibration Automated, simplified and accurate for all airflows

and DUT types

Thermal head raising and lowering Pneumatic control on thermal head,

operated manually or via remote interface

Head positioner movement

Manual locking (4 locks), 360

head rotation; head

can be manually pivoted, turned, tilted and vertically

swung for ease of interface at tester site.

Manipulator (ar

m) movement

Motorized raising and lowering of arm;

330° positioning range around the base unit

Part No. SL10290 R/C

Mobile Temperature System for testing components, hybrids, parts, modules,

subassemblies and printed circuit boards at precise temperature

1 2

Summary of Contents

Page 1 - TP04310A

Temperature Range:1,3-80° to +225°C (60 Hz System)-75° to +225°C (50 Hz System)Typical Temperature Transition Rate (air)1,2-55° to +125°C: approximate

Page 2 - Specifications

Over-Temperature Protection +235°C (factory-set) (Also uses user-settable high and low air temperature limit)Mobility 4 swivel caster wheels with lock

Comments to this Manuals

No comments

Atec Temptronic-TP04310A User Manual

Browse online or download User Manual for Equipment Atec Temptronic-TP04310A. Atec Temptronic-TP04310A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Atec Temptronic-TP04310A