Atec Megger-MIT1020-2 User Manual download pdf

MIT520/2 and MIT1020/2

5 kV and 10 kV Insulation Resistance

Testers

CAT IV 600 V

Mains or battery powered

Variable test voltage from 50 to 5000 or

10,000 V

Automatic IR, PI, DAR, SV and DD tests

Measures to 15 TΩ (5 kV) and 35 TΩ

(10 kV)

RS232 and USB download of results to

Megger Download Manager

On board memory for results storage

MIT520/2 and MIT1020/2

5 kV and 10 kV Insulation Resistance Testers

DESCRIPTION

The new 5 and 10 kV insulation resistance testers from

Megger are designed specifically to assist you with the testing

and maintenance of high voltage electrical equipment. IEEE

43-2000 recommends the use of 10 kV for motor windings

rated above 12 kV and the Megger MIT1020/2 facilitates this.

The case is incredibly rugged and easy to carry, being made

of tough polypropylene and achieving an ingress protection

rating of IP65. In addition, the model number is marked on

both sides of the case for ease of identification in stores or

vehicles.

The instruments have a large easy to read backlit LCD

display making it equally suitable for use in both bright

sunlight and poorly lit environments. Information displayed

includes resistance, voltage, leakage current, capacitance,

battery status and time constant. In addition, the elapsed

time of the test is displayed constantly, removing the need

for separate timers. Adjustable timers and limit alarms are

included.

The instrument can test when being powered by the mains

or its internal rechargeable battery, a great benefit when site

conditions are unknown or long term testing is required.

The controls of the instrument are clear and unambiguous

and a “quick start” guide is included in the lid of the instrument

removing the need to carry bulky manuals under site conditions.

The instrument is fitted with a guard terminal to enhance

accuracy. The guard test lead is included as standard with the

instrument.

To further enhance the flexibility of the instruments both

have the facility to set the test voltage in steps from 50 V to

the maximum output voltage avoiding the expense of several

insulation resistance testers to meet your application needs.

These IR instruments are designed to meet the highest safety

standards and meet the requirements of EN61010. In addition,

the instrument measures the voltage at the terminals and if

this is above 50 V then the instrument will display the high

voltage warning and inhibit testing. At the end of the test the

instrument will automatically discharge the energy transferred

to the equipment during the test phase.

The MIT520/2 and MIT1020/2 are equally suited to routine

testing and diagnostic regimes being pre-programmed with

IR, PI, DAR, SV and DD profiles.

1 2 3

Summary of Contents

Page 1 - MIT520/2 and MIT1020/2

MIT520/2 and MIT1020/25 kV and 10 kV Insulation Resistance Testersn CAT IV 600 V n Mains or battery powered n Variable test voltage from 50 to

Page 2

Memory capacity 32 kB Test regimesAuto IR, PI, DAR, SV and DD. InterfaceRS232 and USBData storeVoltage, test time, leakage current, resistance, PI, DA

Page 3 - ORDERING INFORMATION

MIT520/2 and MIT1020/25 kV and 10 kV Insulation Resistance TestersOTHER TECHNICAL SALES OFFICESNorristown USA, Sydney AUSTRALIA, Ontario CANADA, Trapp

Comments to this Manuals

No comments

Atec Megger-MIT1020-2 User Manual

Browse online or download User Manual for Equipment Atec Megger-MIT1020-2. Atec Megger-MIT1020-2 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Atec Megger-MIT1020-2