Atec Crystal-IS-33 User Manual download pdf



ACCURACYPRESSURE MEASUREMENT

0 to 110% of Full Scale: ±(0.05% of Reading + Floor Term)

Floor Term: 0.005% of FS or display resolution,

whichever is greater

Vacuum: ±(0.25% of Reading

+ Vacuum Floor Term)

Vacuum Floor Term: 0.004 PSI for 16 and 36 PSI

0.01 PSI for 300 PSI



ACCURACYMILLIAMPERES

Accuracy: ±(0.025% of Reading + 0.001 mA)

Range: 0 to 55 mA

Resolution: 0.001 mA

Connection: 4 mm jacks, 19 mm (0.75") spacing



OPERATING TEMPERATURE

0°C to 50°C (32°F to 122°F)



DISPLAY

Screen: 2 lines of up to 6 digits,

5 mm (0.2") high

Display Rate: 2 readings/second (Adjustable to

1, 3, or 3.7 readings/second)



POWER

1 x 9V: 90 hours, typical



DATA/COMMUNICATION

Digital Interface: micro-USB

Includes all eects of operating temperature, linearity, hysteresis,

repeatability and stability, for one year.

All models indicate vacuum, but vacuum specication applies

to 16 PSI, 36 PSI, and 300 PSI models only.

Not recommended for continuous use at high vacuum.

Includes all eects of operating temperature, linearity, hysteresis,

repeatability and stability, for one year.

mA can be displayed as a percentage, where 0 to 100%

corresponds to either 4 to 20 mA or 10 to 50 mA.

Jacks are compatible with safety sheathed banana plugs.

Non-condensing.

LCD readable in sunlight.

Changes to reading rate requires software: CongM30 is a free

download from crystalengineering.net.

Uses one alkaline 9V battery.

Use of USB interface reduces operating time.

Do not use USB in Hazardous locations.

Free Labview drivers available online.

2 LINE

8 CHARACTER

LCD DISPLAY

SENSOR

DIAPHRAGM

LOCATIONS

DIMENSIONS ARE IN MM (INCHES)

137. 2

(5.40)

69.8

(2.75)

1/8" FNPT

PRESSURE PORTS

PRESSURE PORT VOLUMETRIC DATA:

 4mm

SHIELDED

BANANA JACKS

29.2

(1.15)

LP distance to diaphragm ( A to B ): 22.4 (0.88")

LP volume: 2 ml (0.13 cubic inches)

HP distance to diaphragm ( A to B ): 17.8 (0.70")

HP volume: 1 ml (0.06 cubic inches)

MICRO-USB

CONNECTION

DO NOT EXCEED MAXIMUMS

30 Series PSI Data Sheet

4534 . C

Page 1 of 3

30 Series Calibrator PSI

1 2 3

30 Series Calibrator PSI 1

Summary of Contents

Page 1 - 30 Series Calibrator PSI

ACCURACYPRESSURE MEASUREMENT 0 to 110% of Full Scale: ±(0.05% of Reading + Floor Term) Floor Term: 0.005% of FS or display resolution, whic

Page 2

ENCLOSURE All Models: Extruded aluminum with polyester keypad and labels Model 31≤600 PSI: 342 g (12.0 oz) *Model 31≤600 PSI: 428 g (15.

Page 3

IntrinsicSafetyModel Sensors1st PressureRange P/N2nd PressureRange P/NPressure UnitManifoldIS 3 PSISingle Sensor: 1Standard (omit)Dual Sensor: 3 Stain

Comments to this Manuals

No comments

Atec Crystal-IS-33 User Manual

Browse online or download User Manual for Equipment Atec Crystal-IS-33. Atec Crystal-IS-33 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Atec Crystal-IS-33