Atec Agilent-N9000A-CXA User Manual

CXA X-Series Signal Analyzer N9000A9 kHz to 3.0, 7.5, 13.6, or 26.5 GHzData Sheet

10Nominal dynamic range at 1 GHz for RF CXA-130-120-110-100-90-80-70-60-80 -70 -60 -50 -40 -30 -20Mixer level (dBm)DANL (1 Hz RBW)2nd harmonicdistorti

11Figure 5. Nominal phase noise at different center frequencies for MW CXA (Option 513 or 526)Phase noise 1Offset Specification TypicalMW (Option 513,

12Channel powerAmplitude accuracy, W-CDMA or IS95(20 to 30 °C, attenuation = 10 dB)± 1.33 dB (± 0.61 dB 95th percentile)Occupied bandwidthFrequency ac

13Output frequencyFrequency range Option T03 1 Option T06 19 kHz to 3 GHz9 kHz to 6 GHzResolution 1 HzOutput power levelRange −50 to 0 dBmResoluti

14Frequency rangeOption C75 11 MHz to 1.5 GHzMaximum safe input levelAverage continuous power or Peak pulse power+72.5 dBmV (0.25 W)+63 dBmV (25 mW)I

15Temperature rangeOperating 5 to 50 °CStorage –40 to 70 °CEMCComplies with European EMC Directive 2004/108/EC•IEC/EN61326-1orIEC/EN61326-2-1

16Front panelRF input Connector Type-N female, 50 Ω nominalRF input (Option C75) Connector Type-N female, 75 Ω nominalRF output (Option T03 or T06

17Rear panel (continued)LAN TCP/IP interface Standard Connector1000Base-TRJ45 EthertwistSync (reserved for future use) Connector BNC femaleIF ou

18FrequencyFrequency span Standard instrument Option B2510 Hz to 10 MHz10 Hz to 25 MHzResolution bandwidth (spectrum measurement)Range Overall

19cdma2000® is a registered certification mark of the Telecommunications Industry Association. Windows® and MS Windows are U.S. registered trademarks

2Master the essentialsA great low-cost signal ana-lyzer surpasses the basics and delivers crucial functionality. That’s the strength of the CXA signal

3For more informationThis CXA signal analyzer data sheet is a summary of the complete specifications and conditions for N9000A CXA signal analyzers (i

4Frequency range DC coupled AC coupledOption 503 NA 9 kHz to 3.0 GHzOption 507 NA 9 kHz to 7.5 GHzOption 513 9 kHz to 13.6 GHz 10 MHz to 13.6 GHzOptio

5Marker frequency counterAccuracy ± (marker frequency x frequency reference accuracy + 0.100 Hz)Delta counter accuracy ± (delta frequency x frequency

6Amplitude rangeMeasurement rangeRF (Option 503, 507) Preamp off 100 kHz to 1 MHz Displayed average noise level (DANL) to +20 dBm1 MHz to 7.5 GHz Di

7Input attenuation switching uncertainty Specifications Additional informationAttenuation > 2 dB, preamp offRelative to 10 dB(reference setting)50

81 dB gain compression (two-tone) Total power at input mixerRF (Option 503, 507) Preamp off 50 MHz to 7.5 GHz +2 dBm nominal Preamp on (Option P03

9Third-order intermodulation distortion (TOI)Parentheses indicate typical performanceRF (Option 503, 507) Preamp off(Two –20 dBm tones at input mixer