Atec Agilent-6643A User Manual download pdf

This series of 200 W linear-regulated

DC power supplies is designed to

maximize the throughput of DUTs

through the manufacturing test

process with fast up and down

programming time.

Valuable assemblies can be

destroyed by a minor component

failure that can allow a surge of

voltage or current to flow to the

DUT. Fast protection features,

including fast crowbar, mode

crossover protection, and the ability

to connect the protection circuitry

of multiple power supplies can

increase production yield.

Programming of the DC output and

the protection features can be done

either from the front panel or using

industry standard SCPI commands,

via the GPIB. Using the serial link,

up to 16 power supplies can be

connected through one GPIB

address. Test system integration

can be further simplified be using

the VXIPlug&Play drivers. The out-

put voltage and current can also be

controlled with analog signals. This

is helpful for certain types of noisy

environments, and also immediate

reactions to process changes.

Lab bench use is enhanced by the

fan speed control, which helps to

minimize the acoustic noise.

High Performance DC Power Supplies speed and accuracy for test optimization

Specifications

(at 0

to 55

C unless

otherwise specified)

More detailed specifications at

www.agilent.com/find/6640

Fast, low-noise outputs

Analog control of output voltage and current

Fan-speed control to minimize acoustic noise

Parallel and series connections of multiple units

Built-in measurements and advanced programmable features

Protection features to ensure DUT safety

6641A - 6645A

Single-Output

200 W GPIB

6641A 6642A 6643A 6644A 6645A

Number of outputs 11111

GPIB Yes Yes Yes Yes Yes

Output ratings

Output voltage 0 to 8 V 0 to 20 V 0 to 35 V 0 to 60 V 0 to 120 V

Output current (40° C) 0 to 20 A 0 to 10 A 0 to 6 A 0 to 3.5 A 0 to 1.5 A

Maximum current (50° C/55° C) 18 A/17 A 9 A/8.5 A 5.4 A/5.1 A 3.2 A/3 A 1.4 A/1.3 A

Programming accuracy at 25°C ±5°C

Voltage 0.06% + 5 mV 10 mV 15 mV 26 mV 51 mV

Current 0.15% + 26 mA 13 mA 6.7 mA 4.1 mA 1.7 mA

Ripple and noise

from 20 Hz to 20 MHz

Voltage rms 300 µV 300 µV 400 µV 500 µV 700 µV

peak-peak 3 mV 3 mV 4 mV 5 mV 7 mV

Current rms 10 mA 5 mA 3 mA 1.5 mA 1 mA

Readback accuracy at 25°C ±5°C

(percent of reading plus fixed)

Voltage 0.07% + 6 mV 15 mV 25 mV 40 mV 80 mV

+Current 0.15% + 18 mA 9.1 mA 5 mA 3 mA 1.3 mA

-Current 0.35% + 40 mA 20 mA 12 mA 6.8 mA 2.9 mA

Load regulation

Voltage 1 mV 2 mV 3 mV 4 mV 5 mV

Current 1 mA 0.5 mA 0.25 mA 0.25 mA 0.25 mA

Line regualtion

Voltage 0.5 mV 0.5 mV 1 mV 1mV 2 mV

Current 1 mA 0.5 mA 0.25 mA 0.25 mA 0.25 mA

Transient response time Less than 100 µs for the output voltage to recover to its previous level (within 0.1% of

the voltage rating of the supply or 20 mV, whichever is greater) following any step change in load current of up to

50% of rated current

Supplemental Characteristics (Non-warranted characteristics determined by design and

useful in applying the product)

Average resolution

Voltage 2 mV 5 mV 10 mV 15 mV 30 mV

Current 6 mA 3 mA 2 mA 1.2 mA 0.5 mA

OVP 13 mV 30 mV 54 mV 93 mV 190 mV

OVP accuracy 160 mV 400 mV 700 mV 1.2 V 2.4 V

1 2 3 4

Summary of Contents

Page 1 - 200 W GPIB

This series of 200 W linear-regulatedDC power supplies is designed tomaximize the throughput of DUTsthrough the manufacturing testprocess with fast up

Page 2 - (Continued)

39Single-Output: 200 W GPIB (Continued)Specifications(at 0˚to 55˚C unless otherwise specified)6641A- 6643A- 6644A- 6645A- 6645A-J04 J11 J09 J05 J06Spe

Page 3

40AC Input: (AC input frequency 47 to 63 Hz)Voltage 100 Vac 120 Vac 220 Vac 240 VacCurrent 4.4 A 3.8 A 2.2 A 2.0 AInput Power 480 VA, 400 W at

Page 4 - Agilent Technologies

Your Requested Excerpt from the Agilent System and Bench Instruments Catalog 2006The preceding page(s) are an excerpt from the 2006 System and Bench I

Comments to this Manuals

No comments

Atec Agilent-6643A User Manual

Browse online or download User Manual for Power suppliers Atec Agilent-6643A. Atec Agilent-6643A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Power suppliers Atec Agilent-6643A