Atec Agilent-6030A User Manual download pdf

This series of 200 watt and 1000

watt DC power supplies take the

place of multiple power supplies

in your test system by providing

maximum power at a variety of

operating points.

Industry standard SCPI commands

and VXIPlug&Play drivers make

system integration easy. Using the

serial link, up to 16 power supplies

can be connected through one

GPIB address. These power supplies

have excellent electrical efficiency,

making them a good choice for

large systems.

Application Notes:

10 Hints for Using Your Power Supply

to Decrease Test Time

5968-6359E

10 Practical Tips You Need to

Know About Your Power Products

5965-8239E

Agilent DC Power Supplies

for Base Station Testing

5988-2386EN

Basic DC Power Supplies essential features for a tight budget

Specifications

(at 0

to 55

C unless

otherwise specified)

6030A 6031A 6032A 6033A 6035A 6038A

More detailed specifications at

www.agilent.com/find/6030

Autoranging outputs provide maximum power at a variety

of operating voltages

Analog/resistance control of output voltage and current

Series and auto-parallel connections of multiple supplies

Built-in measurements and advanced programmable features

Protection features to ensure DUT safety

6030A, 6031A, 6032A, 6033A, 6035A, 6038A

Single-Output, Autoranging

200 W and 1000 W GPIB

Number of outputs 111111

GPIB Yes Yes Yes Yes Yes Yes

Output ratings

Output Voltage 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V

Output Current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A

Maximum power watts 1,200 W 1,064 W 1,200 W 242 W 1,050 W 240 W

Autoranging output

V1, I

200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A

V2, I

120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 A

V3, I

60 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 A

Programming accuracy Voltage 0.035% 0.035% 0.035% 0.035% 0.25% 0.035%

at 25°C ±5°C +145 mV +15 mV +40 mV +9 mV +400 mV +40 mV

Current 0.2% 0.25% 0.2% 0.15% 0.3% 0.09%

+25 mA +250 mA +85 mA +20 mA +63 mA +10 mA

Ripple and noise Voltage rms 22 mV 8 mV 8 mV 3 mV 50 mV 3 mV

20 Hz to 20 MHz p-p 50 mV 50 mV 40 mV 30 mV 160 mV 30 mV

Current rms 15 mA 120 mA 25 mA 30 mA 50 mA 5 mA

Readback accuracy Voltage 0.08% 0.08% 0.08% 0.07% 0.5% 0.07%

at 25°C ±5°C +80 mV +7 mV +20 mV +6 mV +200 mV +50 mV

Current 0.36% 0.4% 0.36% 0.3% 0.5% 0.2%

+15 mA +100 mA +35 mA +25 mA +50 mA +11 mA

Load regulation

Voltage 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV

Current 0.01%+ 0.01%+ 0.01%+ 0.01%+ 0.03%+ 0.01%+

10 mA 15 mA 10 mA 9 mA 34 mA 5 mA

Line regulation

Voltage 0.01%+ 0.01%+ 0.01%+ 0.01%+ 0.03%+ 0.01%+

5 mV 2 mV 3 mV 1 mV 17 mV 2 mV

Current 0.01%+ 0.01%+ 0.01%+ 0.01%+ 0.03%+ 0.01%+

5 mA 25 mA 10 mA 6 mA 17 mA 2 mA

Transient response time Time 2 ms 2 ms 2 ms 1 ms 5 ms 1 ms

10% step change Level 150 mV 100 mV 100 mV 50 mV 200 mV 7 5 mV

I1 I2 I3

Volts

Amps

Autoranging Output:

1 2 3 4

Summary of Contents

Page 1 - 200 W and 1000 W GPIB

This series of 200 watt and 1000watt DC power supplies take theplace of multiple power supplies in your test system by providingmaximum power at a var

Page 2 - (Continued)

Size0.6128mm5.04"12.7mm0.5"425mm16.75"132.6mm5.2"12.7mm0.5"421.6mm16.6"77mm3.03"2.5mm0.1"RearSideTo pTerminal

Page 3

27Ordering InformationOpt 001 Front panel has only line switch, line indicator, and OVP adjust (6030A–33A and 6038A only)Opt 100 87 to 106 Vac, 48 to

Page 4 - Agilent Technologies

Your Requested Excerpt from the Agilent System and Bench Instruments Catalog 2006The preceding page(s) are an excerpt from the 2006 System and Bench I

Comments to this Manuals

No comments

Atec Agilent-6030A User Manual

Browse online or download User Manual for Power suppliers Atec Agilent-6030A. Atec Agilent-6030A User Manual [es]

Summary of Contents

Comments to this Manuals

Related products and manuals for Power suppliers Atec Agilent-6030A